203 Integrated Double-swing Door

The Centor 203 Integrated Double-swing Door features a clean look, with equal-sized panels and simple lines. With a solid wood interior and thermally-improved aluminum construction, our 203 Double-swing Door will perfectly frame any view.

For inside-outside living without the compromises, Centor’s 203 Integrated Double-swing Door incorporates built-in screens and shades to control insects, sunlight and privacy. Our shades also enhance the thermal properties of the door, with independent tests showing that the blackout shade improves the U-factor by 17% when drawn across the opening.

  • Wood interior in five unfinished options or primed for painting.
  • Aluminum exterior in a range of standard or custom colors.
  • Engineered to last a lifetime – extrusions are painted after cutting and machining so all surfaces are coated, reducing the probability of filiform corrosion. 
  • Hidden hardware including Access AutoLatch™ and AutoLatch™.
  • Integrated insect screens and shades are accessible for service or replacement. 
  • Screen box facings are available to enable simple installation into an existing opening.
  • Double or triple glazing available.
Overall frame width
4' 8 ⅞" - 7' 7 ⅞" (1444 - 2334mm)
Visible frame width
4' ¼" - 6' 11 ¼" (1224 - 2114mm)
Frame height
6'-6 3/16" -10'-6 13/16" (1987 - 3222mm)
Panel width
1' 10 ⅝" - 3' 3 ⅜" (575 - 1000mm)
Panel height
6'-5/8" -10'-1 1/4" (1846 - 3081mm)
Loading
top
Opening
outward

Integrated French Door Diagram

Features
Access AutoLatch™

Centor’s latest locking innovation, the Access AutoLatch™ is available on doors that are Florida hurricane rated. It replaces the traditional entrance handle with a concealed version that’s hidden from view in the door stile.

Centor Access AutoLatch
Interior
The lever is simply lifted to open the doors from the inside. A ‘signifier’ on the face of the panel hints at the lever’s location.
access autolatch exterior handle
Exterior
On the exterior, a slimline vertical pull-handle allows panels to be opened with ease.
Performance
Weather tests

200 Series Folding Doors have achieved the following performance levels when tested in accordance with the standards set by NFRC/AAMA/WDMA/CSA.

Primary Product Designator
Class – LC-PG55
USA Air Infiltration
0.13 cfm/ft² (0.65L/sm²) ASTM E283-04
Canadian Air Exfiltration
Level A3 0.13 cfm/ft² (0.68L/sm²)
Water Infiltration
8.35 psf (400 Pa)
Design Pressure
+/– 55 psf (+/- 2633 Pa)
Downloads
203 Double-swing Outward Opening, 7 ⅞” (200mm) sill
Folding handle heights
pdf
2x6 Wall with Siding Facade, Wood Framed Floor
2x6 Wall with Siding Facade, Concrete Slab
2x6 Wall with Brick Facade
CMU Wall with Brick Facade
Glossary
pdf
Centor door finishes – wood
pdf
Centor door finishes – aluminum
pdf
Centor shade fabric options
pdf
Centor screen mesh options
pdf
Screen and shade configurations
pdf